I hope this will be easy enough to follow along with. The frame that I made for the stained glass will come in a post on it's own...I don't want you to feel like your reading a novel! :)
I found this product in the craft store years back and had some fun making a few things and then forgot all about it. When we moved to Ohio for my husband to attend AFIT for his masters we were only going to be there for 18 months and decided it would be best to live in the new off base housing. It sounded like a good idea at the time...that is until we tried to fit our very large family in a very small space...1500 sq. feet to be exact. Needless to say...lesson learned, never again!
Anyways, there was a side window right by the front door that I wanted to give some privacy too without taking away all the light. I then remembered my faux stained glass paint. This was a great option to a window covering and it was a beautiful feature to our home. The great thing was when we had to move...I just peeled it off!
Forward to now 2010 and my problem window I needed to solve. I realized I could use this same application for the idea I had and I knew it would look great. The only thing I didn't think on...was how much of the clear white paint I would need to do such a big project. The good thing, it is not that expensive so even though I used quite a bit it still didn't break the bank!
My design was done on a piece of plexi glass...not even real glass. I didn't want it to be too heavy so that it wouldn't break, but the cost for such a big piece of plexi is much cheaper than glass. I found mine at Lowes. It comes in different cut sizes and thickness.
Here are some of the tools you will need:
- black marker
- craft knife (razor blade)
- tape measure
- combination square (ruler)
- plexi glass or glass (size depending on your design)
- Gallery Glass paints
- Faux lead lines (you will find these with the Gallery Glass)
- Faux lead paint
- pattern or template
I wanted to have the look of some stained glass with a leaded window done in a harlequin pattern. To do this I first had to create a template for my harlequin pattern.
Using a thick scrapbook paper I made my template by measuring and cutting a square...size will vary depending on your project size. My square was a 5"x5" inch square and my plexi glass is 25"H x 48"W.
One of the things I liked about using the plexi glass, it has two sides with plastic covering over it. I used this to mark my design on. If you did this on glass, you would want to use a non-permanent marker, something that could be washed off.
Starting on your design, you need to find the center. On the backside of the plexi, marking on the plastic covering this is where you will create your design. By measuring your width and then dividing it in half mark a dot; then do this again for your height. I then make a cross in the center.
Once my center was found I decided how big my borders were going to be. Important to remember when you go to frame your glass some of your design will get covered up, make enough of a margin for this.
I used my combination square to keep everything lined up and finding my border.
My level was used in drawing my lines and keeping them straight.
Here's another look with the template.
There is another option you can add to your design if you would like.
I was going to do this, but in the end decided not to.
Using a nickel I traced around it and made a circle over the intersecting lines. I was going to add some color here as well but then decided against it. I would have drawn my circles using the lead paint.
These come in long strips so it made it easier to keep the lines continuing.
They are a soft foam, very flexible and sticky. Again, using the opposite side of your design put the lead lines on the side where you took the plastic covering off. When one line ends, just add another up against it.
*If you need to cut a line don't use scissors it is hard to
get an exact cut and it won't leave an even line, use your craft knife to cut it.
Here is how your design should look once you have all the faux lead lines on.
To give the foam lines a realistic lead look I used the liquid leading over the top.
You don't have to do this, I just wanted mine to look as real as I could.
I had more photos to share on the look of the liquid lead on top of the lead lines,
but for some reason can't find them. It gives the lines a more textured look.
Now the fun part...you get to start adding your colors of paint.
This is where patience and time really comes in, but so worth it when your done.
I chose to only use three colors in my design, but there is
such an array of colors it is whatever you want to create!
Here is an example of how the paint looks when put on the glass. It flows out easily and you want it thick. When it dries it does not look so thick. I like to start along the lead lines and work my way to the center and down. You will get bubbles here and there, using a toothpick you can pop them. Using a back and forth motion with the toothpick it will help spread the paint out evenly as well.
*Another note on the paint, you do not want to shake it! It will not work the way it should and separate. You will get clogs every now and then. I would just use a tissue and pull some of the dried paint out while gently squeezing the bottle.
I worked on my design for several days. It takes at least a day for it to dry...again patience. I would work on it while I watched a show or keep it in an area away from pets and people and whenever I had a moment put more paint down.
In the end you finally end up with this...
A beautiful faux stained glass...can you really tell the difference?
I will have another post on how to build the frame. The great thing about this...it is so versatile! This could be done directly on a window or a piece of glass in a picture frame...whatever your imagination can think of! Would love for you to share your faux stained glass with me as well.
For now, I am back to my sofa...revealing all her under layers and getting to her true beauty...here are some peeks at what I have been up to.
Uncovering her true beauty...
Even Felicity wants to help...
Fixing and making her frame stronger...
Adding a beautiful Whimsy blue...
Soon she will be revealed...for now, have to get back to work and dress her up!
Have a great week friends...hugs and love to you all!!!